New and Improved
New and improved products from Klein Tools in 2013
Web-Strap Ratchet Hoist (Cat. No. KN1500PEX) – Large, non-conductive dial (drum knob) allows web slack to be adjusted with ease. 360° handle rotation. 3/4 ton single line and 1-1/2 ton double line load rating. Tight ratcheting mechanism allows precise tensioning. Meets ANSI/ASME B30.21-2005 and B30.10-2009 standards. #KleinTools
Klein Kurve® Skinning Knife (Cat. No. 1580-3) – 2” blade for increased control when scoring and slitting cable jacket. Ergonomic handle for maximum comfort. Oversized ring for strength and easy storage. Notch on blade back for scraping or removing wire insulation. #KleinTools
#Lineman's Tools from #Klein Tools 3-in-1 Impact Socket - Transmission - (Cat. No. NRHD2) – Features three square socket sizes: 1-1/8'', 1-5/16'', and 1-1/2''; 7/16'' hex to 1-1/8'' square quick-change adapter included; fine tuned ball detent provides improved retention, minimizing drops. 1'' diameter, 7'' long hollow shaft allows use on long threaded bolts
Metric Tape Measure from #KleinTools (Cat. No. 86615) – rare earth magnetic double end hook; oversized, bold blade numbers for easy reading; double-sided rule for measurement while using against wall, ceiling or conduit; horizontal and vertical standout for easy one person measurements; true zero feature for accurate inside and outside measuring.
Open Jaw Cable Cutter from #KleinTools (63711) – High-leverage ratchet mechanism for single-handed cutting of copper and aluminum without burrs or sharp edges; front loading jaws for tight applications; spring release lever allows for fast jaw reset in between cuts. Plastic covered handles with hand guards for comfort and firm grip.
Tradesman Pro™ Organizer Tech Backpack (Cat. No. 55456BPL) – Carry both your laptop and tools in the same bag the Tradesman Pro Organizer Tech Backpack. It has a separate compartment that keeps a laptop protected from other tools, plus 25 more pockets to designed to store adapters, cables, phones, and tools. It's great for technicians, contractors, or any tradesperson who needs to carry a laptop to the jobsite.
Wide Range Distribution Grip (Cat. No. KT4650) – The newest grip from #KleinTools features a large jaw opening that can accommodate a wide range of cable types and sizes. It also has both a ''V'' groove shaped jaw and a round jaw. The large handle opening accepts many size hooks used on hoists, winches, and tackle blocks.
Insulated Linemans Skinning Knife (Cat. No. 1571-INS) – #KleinTools exclusive design features molded measuring marks on back of handle to help measure stripping length of wire. Its large molded handle offers an easier, more comfortable grip. The tough, tempered steel blade provides maximum sharpness and durability to withstand frequent cable scoring. Made in the USA.
#KleinTools MM6000 Electricians / HVAC TRMS Multimeter (Cat. No. MM6000) – Durable, American-made True RMS Multimeter for accurate readings of all signals. Auto ranging multimeter measures AC/DC voltage (1000V), AC/DC current (10A) and resistance. CAT IV safety rating. Built to endure a 10 ft. drop, double insulated and raised rubber molding boot for increased display protection.
#KleinTools MM6000N Electricians / HVAC TRMS Multimeter with NIST Certification (Cat. No. MM6000N) – Durable, American-made True RMS Multimeter with NISCT Certification for accurate readings of all signals. Auto ranging multimeter measures AC/DC voltage (1000V), AC/DC current (10A) and resistance. CAT IV safety rating. Built to endure a 10 ft. drop, double insulated and raised rubber molding boot for increased display protection.
MM5000 Electricians TRMS Multimeter (Cat. No. MM5000) from #KleinTools – Durable, American-made True RMS Multimeter for accurate readings of all signals. CAT IV 600V safety rating. Built to endure a 10 ft. drop, double insulated and raised rubber molding boot for increased display protection.
MM5000N Electricians TRMS Multimeter with NIST Certification (Cat. No. MM5000N) – Durable, American-made True RMS Multimeter with NISCT Certification for accurate readings of all signals. CAT IV 600V safety rating. Built to endure a 10 ft. drop, double insulated and raised rubber molding boot for increased display protection.
3/8" Pole Punch (Cat. No. 66326) – Designed to knock out hardware. Ergonomic handle with overstrike protection. Thermoplastic handle withstands harsh conditions and is resistant to oil and grease. Large strike plate transfers force directly into the hardware, reducing vibration. Chamfered tip assists centering and reduces drag. #KleinTools
Splinter Guard Fish & Glow Rods from Klein Tools – Pain free wire pulling is now possible with Klein Tools' Splinter Guard fish and glow rods! These rods feature a protective coating that keeps electricians' hands free of fiberglass splinters. Luminescent glow rods also feature an improved glow that shines 2x brighter and lasts 2x longer. These extra durable, lightweight Splinter Guard rods are available in a variety of lengths and flexibilities for any application.
Tradesman Pro™ Suspenders from #KleinTools (Cat. No. 55400) – Made of tear-resistant Cordura® Fully adjustable. Durable nylon web straps for long wear. Heavy-duty padding for comfort. Easy snap hook fastening system. Cordura® is a registered trademark of INVISTA for durable fabrics.
Tradesman Pro™ Electricians Tool Belt from #KleinTools (Cat. No. 55427, 55428, 55429) – Removable pouches allow you to carry only the tools you need. Wide open pockets for tools, drill and spare parts. Padded belt with mesh interior is breathable and comfortable Drill bit pocket. Loop tape measure holder. Hammer holder. Rugged leather belt ends. Handles for easy carrying. 1680D ballistic weave for durability. Attachments for suspenders.
6mm x 1M Gooseneck Camera from #KleinTools (Cat. No. 69450) – Smaller footprint when penetrating walls and panels. Gooseneck design for greater control and versatility. IP67 waterproof and dustproof. Bright 4-LED work light. Includes camera attachments: mirror, magnet and camera guide. Compatible with the ET500 and ET510 Borescopes. Also compatible with the 17mm x 1M extension (Cat. No. 69455).
Tradesman Pro™ Organizer Hacksaw Electricians Bag (Cat. No. 55453HSB) – Top-loading hacksaw pocket with protective plastic lining. Fits standard hacksaws up to 16.5" 48 pockets for extreme tool storage. Orange interior for easy tool visibility. Tough, durable molded bottom can withstand cold conditions. 1680D ballistic weave for durability. Shoulder strap and handles for easy carrying.