DIY Tip of the Day: Quick Fix for Loose Door Screws. If a loose screw doesn’t get a grip, try my grandfather's solution. Fill the hole with steel wool, short length of plumbing solder, or wooden match (noncombustible end). Then reinstall the screw. To fill larger holes, insert a wooden golf tee, then cut it off flush. Drill a centering hole and replace the screw. Don't use glue - the screw might never come out again!
First, remove the stripped screw, either with a screwdriver or a good set of pliers. Next, squirt some carpenter's glue into the hole, insert the pointed end of a golf tee in, and tap the tee into place with a hammer. Using a sharp utility knife, cut off the exposed extra part of the golf tee so that its flush with the doorframe. This will give you a fresh piece of material to drill a new screw into.
just roll duckpaper or magazine strips and hot glue them together (:
Use an old glue cap and put it on an acrylic paint bottle to be able to write in color! This is genius!!