DIY Home Decor: How To Make a Sliding Door for Under $40 — Apartment Therapy Tutorial
The first step to assembling the hardware is to slide the pipe through the hinged loops on top of the door. This pipe should be cut at the hardware store and it's size will be determined by the size of your space.
3. Place your drill 1.5 inches from the top of the bend. Drill a 7/32″ pilot hole through both sides of the bended rod. To prevent from burning out your drill bit, you may want to dip your drill bit periodically into some engine oil. If it does get dull, sharpen the tip with your grinder. 4. Using a crowbar, pry the bent end of the bar away from the straight end to make room to insert the wheel. Only pry it about 45 degrees.