Pinterest • The world’s catalog of ideas

Damping Ratio

Damping material gives better ratio of the impedance for the increasing of amplitude of signals, this product is better. For buy these products online at best prices open this site-< http://www.cardamping.com/>.

JL Audio M2250 by JL Audio. $151.00. FEATURES: Class A/B Two-Channel Full-Range Amplifier Unregulated MOSFET switching type power supply RMS Power @ 4-ohms: 80W x 2 RMS Power @ 2-ohms: 125W x 2 RMS Power @ 4-ohms Bridged: 250W x 1 RMS Power @ 8-ohms Bridged: 160W x 1 Signal to Noise Ratio: >104 dB Damping Factor: >200 @ 4 ohms per ch./50 Hz, >100 @ 2 ohms per ch. /50 Hz Absolute Symmetry" Class A/B Circuit (U.S. Patent #6,294,959) Differential-Balanced Input Topology: For s...

M350 : Monoblock Class AB Amplifier/1 x 350W @ 2Ω/1 x 125W @ 4Ω Output Power (RMS) @ 14.4 VDC , THD .04% @ 2Ω: 1 x 350W Output Power (RMS) @ 14.4 VDC , THD 1% @ 4Ω: 1 x 125W Power Supply Input Voltage: 11VDC to 15VDC THD (100Hz @ 1Ω): 0.04% Bandwidth (-3 dB): 18- 350Hz Damping Factor (100Hz @ 4Ω): 126 S/N ratio ( as weighted @ 1 Volt): 99db Input Sensitivity: .25MV - 6.5V RMS Minimum Load Impedance: 2Ω

KONSTRUCTIVE IOLITE High-Performance 29er Mountain Bike •Fortschrittlichste Carbon-Fertigungsmethoden •Handmade in Europa •Beste Schwingungsdämpfungs- und Komfortwerte •Optimales Steifigkeits- zu Gewichtsverhältnis •Wählbare Ausstattungsvarianten für das individuelle DREAMBIKE verfügbar. •Optional: Fertigung nach Maß TECHNISCHE DATEN DES ABGEBILDETEN BIKES Modell: IOLITE XX1 PRO Bike Größe / Gewicht Bike / Gewicht Rahmen: Large / 8,3 kg / 1.050 g Design Style: Konstructive Ruby Red und…

from SlideServe

Sound Damping Material For Car

Damping material gives better ratio of the impedance for the increasing of amplitude of signals, this product is better. For buy these products online at best prices open this site- .

T265 : 2 Channel Class AB Amplifier/2 x 65W @ 4Ω/4 x 85W @ 2Ω Output Power (RMS) @ 14.4 VDC , THD .04% @ 4Ω: 2 x 65W Output Power (RMS) @ 14.4 VDC , THD 1% @ 2Ω: 2 x 85W Output Power (RMS) @ 14.4 VDC , THD 1% @ 4Ω Bridge: 1 x 250W Power Supply Input Voltage: 11VDC to 15VDC THD (1kHz @ 4Ω) : 0.04% Bandwidth (-3 dB): 18- 22K Hz Damping Factor (1k Hz @ 4Ω): 100 S/N ratio ( as weighted @ 1 V olt): 100 dBA Input Sensitivity: .25MV - 6.5V RMS Minimum Load Impedance : 2Ω Input: Pre in RCA

M1000 : Monoblock Class D Amplifier/1 x 1000W @ 1Ω/1 x 500W @ 2Ω Output Power (RMS) @ 14.4 VDC , THD .04% @ 1Ω: 1 x 1000W Output Power (RMS) @ 14.4 VDC , THD 1% @ 2Ω: 1 x 500W Power Supply Input Voltage: 11VDC to 15VDC THD (100Hz @ 2Ω): 0.04% Bandwidth (-3 dB): 18- 150Hz Damping Factor (100 Hz @ 4Ω): 126 S/N ratio ( as weighted @ 1 Volt): 99db Input Sensitivity: .25MV - 6.5V RMS Minimum Load Impedance : 1Ω Input: Pre in RCA