DIY continuous strand weaving looms made with plywood and 1" finishing nails. 3 1/2" and 7". 1/4" nail spacing.  i used a band saw and a scroll saw, and  my dremel in the drill press attachment to pre drill the holes.

DIY continuous strand weaving looms made with plywood and 1 finishing nails. 3 and nail spacing. i used a band saw and a scroll saw, and my dremel in the drill press attachment to pre drill the holes.

{Swipe} >>>>Our Faux Farmhouse DIY Barn Door Tutorial . .  Materials 1x4 and 1x6 Cedar from @loweshomeimprovement, 1.25" 18 gauge finishing nails, table saw/miter saw . .  Assembly Again, let me remind you that we are not tutorial people. We are look-at-a-picture-and-dink-around-til-we-get-it people. So this is a tutorial (ish). . . The total door dimensions are 8'5" x 3'2", we have 8 ft doorways in this house, so if you need smaller doors you'll need to plan cuts accordingly. First,...

{Swipe} >>>>Our Faux Farmhouse DIY Barn Door Tutorial . . Materials 1x4 and 1x6 Cedar from @loweshomeimprovement, 1.25" 18 gauge finishing nails, table saw/miter saw . . Assembly Again, let me remind you that we are not tutorial people. We are look-at-a-picture-and-dink-around-til-we-get-it people. So this is a tutorial (ish). . . The total door dimensions are 8'5" x 3'2", we have 8 ft doorways in this house, so if you need smaller doors you'll need to plan cuts accordingly. First,...

Hitachi 14305 Bright Finish Nail, 2"

Hitachi 14305 Bright Finish Nail, 2"

This attractive decoration is made with a light grey cotton (21 x 24cm) fabric, which says Wild Child in black. The banner can be hung in your childs room or anywhere in the House, you need a finishing nail. Other models are available in my shop. For all customizations do not hesitate to

This attractive decoration is made with a light grey cotton (21 x 24cm) fabric, which says Wild Child in black. The banner can be hung in your childs room or anywhere in the House, you need a finishing nail. Other models are available in my shop. For all customizations do not hesitate to

ProFit 0059155 Finishing Nails, Hot Galvanized, 2-1/2", 8 D

ProFit 0059155 Finishing Nails, Hot Galvanized, 2-1/2", 8 D

This DIY Floor Project was made from Plywood, we took 13 full sheets of Plywood and ripped the into 6 in wide and 8 ft long Planks, then glues down with also some finishing nails, Stained and Polyurethaned, Total square footage was 400, Total Cost of this Project was 300.00 and we did a Living Room, Bedroom and Hallway, , Now that's a $$$$$ Saving Project. ..  https://www.facebook.com/pages/Trash-To-Treasures/261463607265438?ref_type=bookmark

This DIY Floor Project was made from Plywood, we took 13 full sheets of Plywood and ripped the into 6 in wide and 8 ft long Planks, then glues down with also some finishing nails, Stained and Polyurethaned, Total square footage was Total Cost of this

This attractive decoration is made with a light grey cotton (21 x 24cm) fabric, which says Wild Child in black. The banner can be hung in your childs room or anywhere in the House, you need a finishing nail. Other models are available in my shop. For all customizations do not hesitate to

This attractive decoration is made with a light grey cotton (21 x 24cm) fabric, which says Wild Child in black. The banner can be hung in your childs room or anywhere in the House, you need a finishing nail. Other models are available in my shop. For all customizations do not hesitate to

This attractive decoration is made with a green cotton (21 x 24cm) fabric. This banner is fully customizable: font, color of the fabric, you can even add a small design (arrow, heart...) The banner can be hung in your childs room, you need a finishing nail. I bring special care to pack

This attractive decoration is made with a green cotton (21 x 24cm) fabric. This banner is fully customizable: font, color of the fabric, you can even add a small design (arrow, heart...) The banner can be hung in your childs room, you need a finishing nail. I bring special care to pack

Simpson S16N150FNJ 16 Gauge Straight Finish Nail, 1-1/2" L

Simpson S16N150FNJ 16 Gauge Straight Finish Nail, 1-1/2" L

Grip-Rite GRDA25GLM Angled Finish Nails, 2-1/2"

Grip-Rite GRDA25GLM Angled Finish Nails, 2-1/2"

Materials: Hemnes 3-Drawer Chest, Hand Saw, Plasterboard Saw, Circular Miter Saw, Hammer, Power Screwdriver, Level, 2″ Wood Screws, 3″ Wood Screws, 3″ Nails, Utility Knife, 2″x3″ Framing Studs, Plasterboard Hand Sander, Shims, Hand Level, 1″ Finishing Nails, Spackle, Painter’s Tape Description: Chest Prep Work 1. Assemble Hemnes 3-drawer chest unit using instructions provided in package. …

Materials: Hemnes 3-Drawer Chest, Hand Saw, Plasterboard Saw, Circular Miter Saw, Hammer, Power Screwdriver, Level, 2″ Wood Screws, 3″ Wood Screws, 3″ Nails, Utility Knife, 2″x3″ Framing Studs, Plasterboard Hand Sander, Shims, Hand Level, 1″ Finishing Nails, Spackle, Painter’s Tape Description: Chest Prep Work 1. Assemble Hemnes 3-drawer chest unit using instructions provided in package. …

Zach Stewart from Faith Center Foursquare Church in Eureka, CA brings us this string design. The stage was 32'W and 15'H. To duplicate it, you'll need: - 2x4 wood (cheap is fine, it will be painted black) - Black paint - White yarn - Black finishing nails - Steel flat brackets (12 for each hexagon) - Metal cup hooks (2 for each hexagon) - Black carbon fiber cord (for suspending hexagons) The Hexagon shapes were created with 2x4s cut at a 150° angle and braced with steel flat brack...

Zach Stewart from Faith Center Foursquare Church in Eureka, CA brings us this string design. The stage was 32'W and 15'H. To duplicate it, you'll need: - 2x4 wood (cheap is fine, it will be painted black) - Black paint - White yarn - Black finishing nails - Steel flat brackets (12 for each hexagon) - Metal cup hooks (2 for each hexagon) - Black carbon fiber cord (for suspending hexagons) The Hexagon shapes were created with 2x4s cut at a 150° angle and braced with steel flat brack...

Senco M001000 Finish Nail Straight, 3/4" X 16" Gauge, 2,000 per box

Senco M001000 Finish Nail Straight, 3/4" X 16" Gauge, 2,000 per box

{Swipe} >>>>Our Faux Farmhouse DIY Barn Door Tutorial . . Materials 1x4 and 1x6 Cedar from @loweshomeimprovement, 1.25" 18 gauge finishing nails, table saw/miter saw . . Assembly Again, let me remind you that we are not tutorial people. We are look-at-a-picture-and-dink-around-til-we-get-it people. So this is a tutorial (ish). . . The total door dimensions are 8'5" x 3'2", we have 8 ft doorways in this house, so if you need smaller doors you'll need to plan cuts accordingly. First,...

{Swipe} >>>>Our Faux Farmhouse DIY Barn Door Tutorial . . Materials 1x4 and 1x6 Cedar from @loweshomeimprovement, 1.25" 18 gauge finishing nails, table saw/miter saw . . Assembly Again, let me remind you that we are not tutorial people. We are look-at-a-picture-and-dink-around-til-we-get-it people. So this is a tutorial (ish). . . The total door dimensions are 8'5" x 3'2", we have 8 ft doorways in this house, so if you need smaller doors you'll need to plan cuts accordingly. First,...

Pinterest
Search