Corner Brace, Table Leg (1) by Hafele America. $1.75. For simple and economical attachment of table legs to frames, use this corner brace. Ends of the brace are set into grooves in the frame, and hanger bolts then attach leg to the brace. Heavy galvanized steel. 1-1/2" x 4".  Mounting screws and hanger bolts not included.

Corner Brace, Table Leg (1) by Hafele America. $1.75. For simple and economical attachment of table legs to frames, use this corner brace. Ends of the brace are set into grooves in the frame, and hanger bolts then attach leg to the brace. Heavy galvanized steel. 1-1/2" x 4". Mounting screws and hanger bolts not included.

pin 60
heart 3
How to install a hanger bolt - make your own furniture legs! - Plaster & Disaster
pin 115
heart 11
3/8'' -16 x 3'' Steel Hanger Bolts, 8 pack by Rockler. $3.99. These steel Hanger Bolts are ideal when you want the strength and easy assembly of a bolted connection on a wooden joint. Hanger Bolts are perfect for knockdown furniture, and for joining table legs to aprons when used with our Corner Brackets for Table Aprons. Pointed end of hanger bolt screws into a pilot hole in wooden member, while the other serves as a machine threaded stud that accepts a nut, T-nut or t...

3/8'' -16 x 3'' Steel Hanger Bolts, 8 pack by Rockler. $3.99. These steel Hanger Bolts are ideal when you want the strength and easy assembly of a bolted connection on a wooden joint. Hanger Bolts are perfect for knockdown furniture, and for joining table legs to aprons when used with our Corner Brackets for Table Aprons. Pointed end of hanger bolt screws into a pilot hole in wooden member, while the other serves as a machine threaded stud that accepts a nut, T-nut or t...

pin 5
1/4-20 x 1 3/4 Hanger Bolt Driver by Quickscrews International Corp. $7.00. 1/4 hex shank Hanger Bolt Drivers easily install hanger bolts. Thread in hanger bolt and drive to the appropriate depth. Reverse drill to remove the driver.

1/4-20 x 1 3/4 Hanger Bolt Driver by Quickscrews International Corp. $7.00. 1/4 hex shank Hanger Bolt Drivers easily install hanger bolts. Thread in hanger bolt and drive to the appropriate depth. Reverse drill to remove the driver.

pin 1
These are some KILLER instructions for building and installing super strong floating shelves! (His kid was sitting on one of these shelves!)

These are some KILLER instructions for building and installing super strong floating shelves! (His kid was sitting on one of these shelves!)

pin 313
heart 44
speech 1
5/16-18 x 1 1/2 Hanger Bolt Fully Threaded Zinc Plated

5/16-18 x 1 1/2 Hanger Bolt Fully Threaded Zinc Plated

CRL Zinc 1-1/2" Long Hanger Bolt for 3/4" Standoffs Pack of 10 by CR Laurence by CR Laurence. $5.80. Finish: Zinc Length: 1-1/2 in (38.1 mm) Thread Size: 1/4-20 Size: 1/4"-20 x 1-1/2" (38.1 mm) 1/4-20 Thread Size Works with All 3/4" Standoff Bases These CRL Zinc Hanger Bolts can be used in wood, or with plastic anchors. Available in Stainless Steel or Zinc finishes, they have a 1/4-20 thread that will secure all 3/4 inch (19.05 millimeter) Standoff Bases.

CRL Zinc 1-1/2" Long Hanger Bolt for 3/4" Standoffs Pack of 10 by CR Laurence by CR Laurence. $5.80. Finish: Zinc Length: 1-1/2 in (38.1 mm) Thread Size: 1/4-20 Size: 1/4"-20 x 1-1/2" (38.1 mm) 1/4-20 Thread Size Works with All 3/4" Standoff Bases These CRL Zinc Hanger Bolts can be used in wood, or with plastic anchors. Available in Stainless Steel or Zinc finishes, they have a 1/4-20 thread that will secure all 3/4 inch (19.05 millimeter) Standoff Bases.

CRL Stainless 3" Long 3/8"-16 Hanger Bolt for 1-1/2" and 2" Diameter Standoff's by C.R. Laurence. $6.11. 3/8"-16 Thread Size Works with All 1-1/2" and 2" Standoff Bases These CRL Hanger Bolts can be used in wood, or with plastic anchors. 3/8"-16 thread that will secure all 1-1/2 inch and 2 inch (38.1 and 50.8 millimeter) Standoff Bases. Finish: Stainless Steel Thread Size: 3/8"-16 Length: 3 in (76.2 mm)

CRL Stainless 3" Long 3/8"-16 Hanger Bolt for 1-1/2" and 2" Diameter Standoff's by C.R. Laurence. $6.11. 3/8"-16 Thread Size Works with All 1-1/2" and 2" Standoff Bases These CRL Hanger Bolts can be used in wood, or with plastic anchors. 3/8"-16 thread that will secure all 1-1/2 inch and 2 inch (38.1 and 50.8 millimeter) Standoff Bases. Finish: Stainless Steel Thread Size: 3/8"-16 Length: 3 in (76.2 mm)

3/8-16 x 4 Hanger Bolt Fully Threaded 18-8 SS

3/8-16 x 4 Hanger Bolt Fully Threaded 18-8 SS

3/8-16 x 1 7/8 Hanger Bolt Driver

3/8-16 x 1 7/8 Hanger Bolt Driver

Pinterest • The world’s catalog of ideas
Search