Tarrerias-Bonjean (TB-Groupe) is the leading knife manufacturer in France with some of the highest grade products on the market. Their best selling knife, the Evercut, took 5 years of R before it was finalized. The Evercut is made with a laser that fuses ultra-hard titanium carbide onto a stainless steel edge. The result is a 20 cm x 3 mm thick blade that only needs to be sharpened once every 25 years by practical chefing standards. ToMo is featuring the Evercut and other quality pieces; if…

Tarrerias-Bonjean (TB-Groupe) is the leading knife manufacturer in France with some of the highest grade products on the market. Their best selling knife, the Evercut, took 5 years of R before it was finalized. The Evercut is made with a laser that fuses ultra-hard titanium carbide onto a stainless steel edge. The result is a 20 cm x 3 mm thick blade that only needs to be sharpened once every 25 years by practical chefing standards. ToMo is featuring the Evercut and other quality pieces; if…

pin 13
Tandy Leathercraft Industrial Knife Set with Blades 3595-... https://www.amazon.com/dp/B0036LKEYC/ref=cm_sw_r_pi_dp_x_JH.6xbQVQJ9T6

Tandy Leathercraft Industrial Knife Set with Blades 3595-... https://www.amazon.com/dp/B0036LKEYC/ref=cm_sw_r_pi_dp_x_JH.6xbQVQJ9T6

Maple Knife Set By The Federal, Canada • Photography Courtesy of The Federal • http://knstrct.com/2013/01/28/maple-knife-set-canada/

Maple Knife Set By The Federal, Canada • Photography Courtesy of The Federal • http://knstrct.com/2013/01/28/maple-knife-set-canada/

pin 90
heart 18
Master Craftsman Knife Set   Industrial knife and blades. Walnut handles feature solid brass jaws and ferrule.

Master Craftsman Knife Set Industrial knife and blades. Walnut handles feature solid brass jaws and ferrule.

pin 3
The first Buck knife was produced in 1902 by a young Kansas blacksmith apprentice called Hoyt Buck. He was looking for a better way to temper steel so it would hold an edge longer, and by doing this, is how it all began. Hoyt made each knife by hand, using worn out file blades as raw material, and he was greatly appreciated for his work during WWII. Hoyt and his son Al then moved to San Diego and then set up shop as H.H. Buck and Son in 1947. His son Al then revolutionized the knife industry…

The first Buck knife was produced in 1902 by a young Kansas blacksmith apprentice called Hoyt Buck. He was looking for a better way to temper steel so it would hold an edge longer, and by doing this, is how it all began. Hoyt made each knife by hand, using worn out file blades as raw material, and he was greatly appreciated for his work during WWII. Hoyt and his son Al then moved to San Diego and then set up shop as H.H. Buck and Son in 1947. His son Al then revolutionized the knife industry…

pin 1
Pinterest • The world’s catalog of ideas
Search