Pinterest • The world’s catalog of ideas

Tuesday Tool Tip: How do I know which type of Kreg screw to use when joining 1/2"-thick material? // Yesterday we had a customer express confusion regarding our screw chart. He didn't know whether to use 3/4" or 1" Kreg screws when working with 1/2"-thick material. So, we've created a Tool Tip that explains the difference: If you're joining 1/2"-thick material to 1/2"-thick material, use a 3/4" screw. If you're joining 1/2"-thick material to material that is thicker than 1/2", use a 1"…

144
6

At first glance, a Kreg Screw might not look much different from other wood screws. But don’t be fooled: There’s a lot of serious engineering built into them. Compare a Kreg® Screw to an ordinary wood screw or a drywall screw (which many use as a general-purpose screw for building), and you can see that the Kreg Screw has unique features that those other screws don’t. Every one of those features is there to ensure that you get the best results possible.

56
7
from Tomboy Supply

Kreg Screw Selector Wheel SSW

The Screw Selector Wheel makes it easier than ever to build projects with Kreg Joinery™. Just dial in the thickness of each piece to be joined—whether those thicknesses are the same or different—and t

48
4

The all-new Kreg Screw Organizer offers a great way to store Kreg Screws in a compact, easy-to-carry, easy-to-store package. The Screw Organizer is also a perfect companion to the Kreg System Organizer, making it easy to create a coordinated, stackable organizing system for Kreg Screws and an entire Kreg Joinery System.

17

Kreg® offers a complete line of pocket-hole screws for every workpiece thickness and type. Here is a handy chart to help you select the correct screw length for your projects.

157
9
from Popular Woodworking Magazine

You Need to Know the 7 Bs of Building Bookcases

Kreg Tool Tip: Working with Different Board Thicknesses | When joining boards of two different thicknesses edge-to-edge or end-to-edge, set your Kreg Jig® according to the thickness of the thinner board. The picture shows a ½"-thick board and ¾"-thick board that were joined with pocket holes. As you can see, the Kreg Jig® was set for ½"-thick material, the thinner board. We've also included a helpful chart that shows which Kreg Jig® setting and screw length to use based on material…

28
1