Pinterest • The world’s catalog of images

Pocket Hole

Excellent guide for pocket hole screw sizes

390
32

How to Make Pocket Holes WITHOUT a Kreg Jig

1k
105
1

Whether you own a pocket-hole jig or are considering buying one, these shop-won insights will help you get more from your jig.:

25
1

Building drawers is a very handy skill! This drawer was built to replace a worn out one in a kitchen, but you could build all the drawers for your kitchen cabinets, too.

91
6

The typical rule is as follows: Set your Kreg Jig® for the thickness of material you are drilling the pocket hole in. Then, choose screw size based on thickness of the mating piece the screw will be entering in to.

118
16

Kreg Tool Tip: Working with Different Board Thicknesses | When joining boards of two different thicknesses edge-to-edge or end-to-edge, set your Kreg Jig® according to the thickness of the thinner board. The picture shows a ½"-thick board and ¾"-thick board that were joined with pocket holes. As you can see, the Kreg Jig® was set for ½"-thick material, the thinner board. We've also included a helpful chart that shows which Kreg Jig® setting and screw length to use based on material…

427
29

Pin this to your DIY board! Quick Start Guide - Kreg Jig: What does it do? How to set it up? How to make pocket holes? All those questions answered here!

192
19
from eBay

Double 3/8" Pocket Hole Jig Drill Guide w/ or w/out Step Drill Bit & Stop Collar

Double-3-8-Pocket-Hole-Jig-Drill-Guide-w-or-w-out-Step-Drill-Bit-Stop-Collar

3
from Rogue Engineer

How to build a Church Pew { Free DIY Plans

DIY Church Pew - Free Plans - 2x10x8 (2), 2x2x8 (2), 1x10x10 (1), 1x6x10 (2), 1x2x6 (2) + pocket screws, brad nails, wood screws (2 1/2" and 2"), wood glue, wood filler, pocket hole plugs

987
79