Project: Sheet Steel ChairMaterials: 20 gauge, 316 grade stainless steel sheetSize: 55w x 50d x 70h Description: The net of a chair is nitrogen-assisted laser-cut in 0.9mm stainless steel, folded by hand and secured with double sided VHB foam tape, combining a computer controlled industrial process with hand assembly. Use of pre-finished stainless steel means the chair requires no post-finishing.By Max Lamb
diy metal backsplash. I made the backsplash out of galvanized aluminum flashing from Lowes. This usually goes underneath roof shingles, but here it let me put hooks. I used heavy wire cutters. The metal isn't very heavy, so anything that cuts wire should probably work. I drew guidelines with marker to help - cutting that stuff is tricky. You do have to be really careful - I would lay a towel or sheet down underneath as you cut, because little shavings of sharp metal splinter off.