Kaizen Organization Foam http://www.fastcap.com/estore/pc/Kaizen-Foam-p13435.htm#!prettyPhoto

Idea for use with small dresser Kaizen Organization Foam miles 7500 Avenue Sacramento CA

Overhead Clamp Rack | Woodsmith Tips

Short lengths of PVC pipe held in the rack serve as compartments to store each clamp individually. By lining the pipes up side by side, have easy access to the exact size of clamp needed.

fan on wheeled frame made from 2x4 scraps.

Tips From don't be Stick-In-The-Mud Woodshop: fan on wheeled frame made from scraps, by Jim Randolph Long Beach, Mississippi. Wood News Online No. 92 April by Highland Woodworking

❧ When cutting especially wide or long pieces, a support on the side of the tablesaw helps make safe, struggle-free cuts. Here’s an inexpensive and effective support requiring just a length of PVC pipe, a few wood scraps, and a sawhorse. From the scrap, fashion two H-shaped saddles—capable of holding a length of 2" I.D. PVC pipe firmly in place—that fit snugly over your sawhorse’s top rail. Size the saddles so that the PVC pipe stands flush with the top of your tablesaw. —Gil Peck…

Saddle that horse for slick support For support on the side of the tablesaw…

DIY Pallet breaker Little metal work and welding will give you an awesome tool to pull boards off pallets to make your projects.

Simple Prybar for Pallets

This is a simple prybar made to break pallets, while saving more of the wood. This project will require one length of square tubing, wall, approximately in .

Rockler Roller Stand - Rock solid. excellent finish, heavy duty height adjusting handle. This stand is the best I own. Not a lightweight, but I'll trade weight for stability and strength any day.

Rockler Roller Stand

This stand is the best I own. Not a lightweight, but I'll trade weight for stability and strength any day.

pvc pipe caulking tube storage (Cut pieces of 2” inside diameter PVC pipe 8” long. Drill two sets of holes straight through the pipe to fit a flathead screw.)

pvc pipe caulking tube storage (Cut pieces of inside diameter PVC pipe long. Drill two sets of holes straight through the pipe to fit a flathead screw.


More ideas
Adjustable Outfeed Roller - the roller is a piece of PVC pipe

15 Free Table Saw Outfeed Plans: Mobile Tables, Folding Tables, Outfeed Stands…

All of us have experienced the problem of the elusive glue-bottle cap. As we work on a project, the cap gets harder and harder to put back on the bottle, so we eventually leave it off. Then it immediately disappears. To solve this problem, I attached the cap to the bottle using a 6" length of string. —Ron Altier, West Lafayette, Ohio

Wood Magazine – Shop Tip of the Day Never miss a bit with holder-and-gauge combo. (I'm kind of embarrassed to have never thought of this.

Follow these 7 simple steps to make your own custom extension cord wrap. Keeping your extension cords stored neatly doesn't have to be a pain. Try this tip.

How to Make Your Own Elastic Extension Cord Wrap

Make cord wraps using old ungee cords and synthetic wine corks. Drill 2 holes in the cord, thread cord through holes, and tie off ends. Make short or long.

Cord-Keeper Handle | cut the dowel to length, drill a hole through its center, form a loop with the rope, pass the ends through the dowel, and tie a knot. The keeper makes a great handle for carrying and can be used as a hook for hanging the coiled cord.

garage organization DIY: How to Make a Cord Hanger - using a dowel and a piece of rope. This is a great way to keep your cords organized, tangle - free and off the floor - via My Home My Style

Filter over a fan for dust! for the shop

Great for the work shop Attach a furnace filter with hook-and-loop tabs to the air intake side of a box fan. Fine dust particles from sanding and sawing will be drawn into the filter by the vacuum created by the fan. Also cool for a chicken coop

See there? How cool is THAT? You could disguise that and use it in a traditional room. What is it? It's a "floor sweep". Simply sweep the crap into the box and the dust collector sucks it up.

A fully loaded workshop play space See there? You could disguise that and use it in a traditional room. What is it? It's a "floor sweep". Simply sweep the crap into the box and the dust collector sucks it up.

PVC storage on a peg board -- I suspect this idea will come in handy someday.

PVC pipe and wood bracket mounted to pegboard for storage in garage. Notice the holes drilled into the top of the wood: you can use this basic "plate" to customize any kind of bracket, holder, etc. for pegboard.

Pinterest
Search