Pinterest • The world’s catalog of ideas
Kreg Tool Tip: Working with Different Board Thicknesses | When joining boards of two different thicknesses edge-to-edge or end-to-edge, set your Kreg Jig® according to the thickness of the thinner board. The picture shows a ½"-thick board and ¾"-thick board that were joined with pocket holes. As you can see, the Kreg Jig® was set for ½"-thick material, the thinner board. We've also included a helpful chart that shows which Kreg Jig® setting and screw length to use based on material…

Kreg Tool Tip: Working with Different Board Thicknesses | When joining boards of two different thicknesses edge-to-edge or end-to-edge, set your Kreg Jig® according to the thickness of the thinner board. The picture shows a ½"-thick board and ¾"-thick board that were joined with pocket holes. As you can see, the Kreg Jig® was set for ½"-thick material, the thinner board. We've also included a helpful chart that shows which Kreg Jig® setting and screw length to use based on material…

<b>Que el bosque esté contigo.</b>

Para reducir las cortezas espinosas, frota los cordones de tus botas de excursión con parafina antes de ir al sendero.

What's the Difference: Phillips-head screwdriver bits. Choosing the right bit helps prevent stripping screws

What's the Difference: Phillips-head screwdriver bits. Choosing the right bit helps prevent stripping screws

MUEBLES DOMOTICOS: COMO HACER UNA SIERRA CIRCULAR DE BANCO(PLANOS, MATERIALES Y PASOS).

MUEBLES DOMOTICOS: COMO HACER UNA SIERRA CIRCULAR DE BANCO(PLANOS, MATERIALES Y PASOS).

28 Ideas Brillantes Organización del garaje | Dispensador de cinta DIY Jumbo

28 Brilliant Garage Organization Ideas (With Pictures)

28 Ideas Brillantes Organización del garaje | Dispensador de cinta DIY Jumbo

Shop Tips & Tricks #12: Making Long, Round Things in Wood - with the Norwegian Dowel Cutter - by GnarlyErik @ LumberJocks.com ~ woodworking community

Shop Tips & Tricks #12: Making Long, Round Things in Wood - with the Norwegian Dowel Cutter - by GnarlyErik @ LumberJocks.com ~ woodworking community

Shop Tips & Tricks #12: Making Long, Round Things in Wood - with the Norwegian Dowel Cutter

Shop Tips & Tricks #12: Making Long, Round Things in Wood - with the Norwegian Dowel Cutter

I broke off a brass screw while installing a small hinge. Can I get it out?

Q & A: Are Broken Screws Removable?

"When you make a table saw's pushstick—and there should always be one handy—cut two notches instead of one in the end." The stepped stick end has one notch cut at ½-inch depth and a second notch cut to ¼ inch. Flipping the stick allows either thickness of stock to be pushed safely and securely toward the blade. — March 1962   - PopularMechanics.com

Know Your Stuff: The 110 Best DIY Tips Ever

"When you make a table saw's pushstick—and there should always be one handy—cut two notches instead of one in the end." The stepped stick end has one notch cut at ½-inch depth and a second notch cut to ¼ inch. Flipping the stick allows either thickness of stock to be pushed safely and securely toward the blade. — March 1962 - PopularMechanics.com

Klicken Sie auf das Bild, um eine größere Ansicht des Bildes zu erhalten

Klicken Sie auf das Bild, um eine größere Ansicht des Bildes zu erhalten