Also on these boards
Tutorial: Secret to Cutting Felt - Trace your pattern, picture, whatever you want to cut onto Freezer Paper. Iron it onto the felt until it stays. Iron the shiny end onto the felt, the papery feeling side should be on top. Cut around your pattern and then peel off the freezer paper using plain scissors.
How to print on fabric. Do steps in photo, then run fabric through printer to print directly on fabric side (not freezer paper side). Iron image to set. Rinse under water to remove excess ink. Will only work if printer uses water-resistant ink. Check manufacturer website for ink type.
Center-pull balls of yarn are convenient to use and to store, and are perfectly easy to make! Rest assured: if you can wind yarn into a regular wrapped ball, you have all the skills it takes to mak...
Secret to Cutting Felt = Freezer Paper Draw or trace your design on the paper side. Iron it onto felt--shiny side down--until the paper sticks to the felt. Then cut around pattern and felt at the same time. Peel the paper off of the felt and Voila! You're done!
Tips for working with felt: After developing your templates, trace the reversed template on the paper side of a piece of freezer paper. Cut out the pattern leaving approximately a 1/4” extra outside the drawn line. With medium heat press your cut-out freezer paper pattern to the wrong side of your felt. Cut out your template on the drawn line. Peel off the remaining freezer paper.