There’s more to see...
Come take a look at what else is here!
Visit site
  • Janie Burel

    how to cut bottles with yarn + nail polish remover. because hubby wants to reuse all the wine bottle we got in finger lakes, ny.

  • Kati Foster

    Neat way to use some glass bottles we like! How to cut bottles with yarn + nail polish remover.

  • Ashley Rossman

    I'm doing this this weekend!!! cutting glass bottles with nail polish remover, yarn and fire.

  • Christina Ccw

    How to simply cut glass. 1. Clean your bottles thoroughly and let dry. 2. Wrap the yarn three or four times around the bottle where you want the break of to be. Knot and cut the yarn. If your glass is pretty thick, you'll want to double up the yarn. Beer bottles are the easiest to break, while wine and liquor bottles take a bit more juice. 3. Take the yarn off the bottle, keeping the loops intact. Saturate it in the nail polish remover. I put some in a little bowl and dipped the yarn in it. 4. Put the yarn back around the bottle. Arrange it so the edges are straight (especially the top layer of yarn,) unless, of course, you want it angled, which is cool. Try not to manhandle it too much, though. You want to keep the acetone in the yarn, not dripping down the bottle. 5. Fill a your sink with water. You want the water as cold as possible — I even added some ice. 6. Over the sink, light the yarn on fire. Rotate the bottle continuously until the flame extinguishes itself — about 60 seconds. This sounds crazy, but the fire really does stay contained to the yarn, and this is a safe inside project. Wash your hands after handling the saturated yarn and lighting it on fire, though, and for god's sake: Use good judgment! 7. When the flames extinguish, plunge the bottle immediately into the water. It should crack on its own, but a small tap with the back of a spoon could help a stubborn bottle along. Sometimes, they won't break at all, and don't force it. You'll just have to try again, and double up on the yarn. It probably didn't break because the glass was thicker than you thought. Remember, please: It's not perfect. Sometimes it will work, sometimes it won't. Sometimes your edges will crack, sometimes it will break clean. It's science, but it's not exact. Experiment with it. 8. Thoroughly sand the edges of the bottle, inside and out. I tried both sand paper and my Dremel (which, if you chose to do, use eye protection and do it outside!) If sanded correctly, these former bottles would be safe enough to drink from. Make one — or if you're like me — go clean out the recycling center of all the cool bottles and have a ball! The vases in these pictures were made from Peirre water, olive oil, Fanta and Tabasco sauce bottles.

Related Pins

Dump A Day Fun Do It Yourself Craft Ideas - 52 Pics

Wine/beer bottle candles. These are so pretty made with different color bottles. Can also use votive candles. Hang several from a tree for ambiance at night.

I think I like the naked bulbs better for the industrial lighting, but somehow these keep drawing me back in - I think they have a lovely whimsical aspect that is hard to ignore - I'm thinking maybe as a statement above the breakfast bar.

DIY: How to Cut Glass Bottles for Use in Other Projects (Glass wine bottle lights)

How to Cut Wine Bottles for Crafts, from

Two liter bottles with threads and bottoms cut off then painted for an uber-cute craft show display!

I've tried this once and it didn't quite cut how I wanted it to but practice makes perfect. :) I'm planning to make candle holders and maybe jazz them up with some lace around the trim or other fun, cute fabrics. You can also use mod podge to attach fabric and make some cool little holders for your treasures.

cutting glass bottles.. who knew it was so easy?!- i watched the videos, it works!!

RECYCLING WINE BOTTLES into windchimes, eco friendly and green, wind chimes, mobile, musical and colorful, wind chime