Take the cap off and cut the tip off and you are ready to go.  When you are finished, just replace the cap to store it for use on a future project.

Take the cap off and cut the tip off and you are ready to go. When you are finished, just replace the cap to store it for use on a future project.

Bathroom Wainscoting and gorgeous paint color - this could be a good approach to remodeling the master bath ... wainscot over the wallpaper instead of stripping and painting the walls.

Bathroom Wainscoting and gorgeous paint color - this could be a good approach to remodeling the master bath ... wainscot over the wallpaper instead of stripping and painting the walls.

DIY End Tables with Step by Step Tutorials - Homemade End Table From Old Windows - Cheap and Easy End Table Projects and Plans - Wood, Storage, Pallet, Crate, Modern and Rustic. Bedroom and Living Room Decor Ideas http://diyjoy.com/diy-end-tables

DIY End Tables with Step by Step Tutorials - Homemade End Table From Old Windows - Cheap and Easy End Table Projects and Plans - Wood, Storage, Pallet, Crate, Modern and Rustic. Bedroom and Living Room Decor Ideas http://diyjoy.com/diy-end-tables

How to repaint chipped, flaking or dirty moldings so they look like new; the secrets of a professional-looking job.

How to repaint chipped, flaking or dirty moldings so they look like new; the secrets of a professional-looking job.

Scraping out moldy caulk from around a bathtub is a tough, tedious job. And if you get too aggressive, you'll chip a tile or mar the tub finish. Make the job a lot easier by first softening the caulk with a caulk remover.

Scraping out moldy caulk from around a bathtub is a tough, tedious job. And if you get too aggressive, you'll chip a tile or mar the tub finish. Make the job a lot easier by first softening the caulk with a caulk remover.

How to caulk a perfectly straight line:    1. Squirt some caulk in the area between the tape.    2. Smooth caulk with your fingertip.    3. Continue smoothing.     4. While the caulk is still wet, slowly and gently pull up the tape.  If you wait until the caulk is dry then it will come up as well.

How to caulk a perfectly straight line: 1. Squirt some caulk in the area between the tape. 2. Smooth caulk with your fingertip. 3. Continue smoothing. 4. While the caulk is still wet, slowly and gently pull up the tape. If you wait until the caulk is dry then it will come up as well.

Painting Tips: Remove stuck-on masking tape by heating it up with a hair dryer and then pulling it off at a 90 degree angle

Painting Tips: Remove stuck-on masking tape by heating it up with a hair dryer and then pulling it off at a 90 degree angle

Pinterest
Search