Ok, maybe not the right board for this but this is a pretty neat idea

Ok, maybe not the right board for this but this is a pretty neat idea

DIY Tip of the Day: Tape Dispenser Caddy. Keep your tape rolls in one place with this handy tape dispenser. You’ll need a 1 1/2-in. dowel, 3/4-in. plywood and a hacksaw blade. Notch the sides and screw everything together. Saw the dowel ends to fit in the notches and screw the hacksaw blade on with the teeth overhanging the plywood. Fasten the dispenser to the workbench. Thanks to R. B. Himes for this idea!

DIY Tip of the Day: Tape Dispenser Caddy. Keep your tape rolls in one place with this handy tape dispenser. You’ll need a 1 1/2-in. dowel, 3/4-in. plywood and a hacksaw blade. Notch the sides and screw everything together. Saw the dowel ends to fit in the notches and screw the hacksaw blade on with the teeth overhanging the plywood. Fasten the dispenser to the workbench. Thanks to R. B. Himes for this idea!

Use offcuts of PVC plumbing pipe in your workshop or craft room to store and organise your supplies and tools. Use a hacksaw or jigsaw to cut pipes at an angle and then mount these onto a piece of board - with screws driven in at an angle - to hang onto the wall.

Use offcuts of PVC plumbing pipe in your workshop or craft room to store and organise your supplies and tools. Use a hacksaw or jigsaw to cut pipes at an angle and then mount these onto a piece of board - with screws driven in at an angle - to hang onto the wall.

Could combine closing doors with a fold down assembly table for some real versatility!

Could combine closing doors with a fold down assembly table for some real versatility!

Pinterest
Search