Discover and save creative ideas
    More from this board

    - This page has many varied and excellent jig ideas for the shop

    DIY Pocket Hole Jig – 1 x 6 for the base. 2 x 3 about 3 1/2 ". Small slot to fit the Kreg Jr. w/o the grey sliding guides. The 2 x 3's were placed apart slightly wider than the jig itself. Screwed and glued. Cut out a small place on the base under the jig for it to slide down far enough to use the 1/2 setting. I used a piece of all thread with a knob, and glued in a nut on the opposite side. When tightened it squeezes the 2 x 3 slightly together holding the jig in place.

    DIY Pocket Hole Jig – Woodworking for Mere Mortals

    T-track Fully Adjustable Arch Drawing Jig / Gabarit entièrement ajustable pour tracer des arcs

    What jig do you have that I don't? - by DKV @ ~ woodworking community

    Woodworking Jigs | Visit

    Quick-and-Easy Height Gauge Woodworking Plan

    Rotary Tool Base - Woodworking Shop - American Woodworker

    How to Modify Your Kreg Jig Pocket Hole Jig for Easier Use from The Pursuit of Handyness via Sawdust Girl

    Finally finished my router jig - by AngieO @ ~ woodworking community

    Homemade Woodworking Jigs | ... in the 2006 wood magazine s best ever woodworking jigs homemade

    Shop Made Pocket Hole Jig

    Shopmade Flip Stops for former Kreg 2000 Pocket Hole Jig

    Shopmade Flip Stops for former Kreg 2000 Pocket Hole Jig

    This is an awesome idea! Adjustable Assembly Supports Woodworking Plan

    Face Frames in 5 Minutes

    The Barkers built board and batten shutters for their home using the Kreg Jig.

    Kreg Jig Workbench Project Video, Part 1: Jeff Devlin walks you through the steps to build your very first workbench, utilizing the project plans included with your Kreg Jig, or available on

    Check out this video of the all-new Kreg Jig® K5 ready to ship!

    Introducing the all-new Kreg Jig® K5! The Kreg Jig® K5 incorporates the best features of every Kreg Jig® that came before, with upgrades you’ve never seen. Read more here:

    Kerf Dado Setting Jig

    DIY Tip of the Day: Cabinet Assembly Station. Here’s a third hand that will ensure square, no-hassle cabinet assemblies. Cut four 7-in. long 2x6s and screw or nail them to a plywood base, leaving exactly square crisscross channels just wide enough for the cabinet parts to fit in snugly. When you assemble the cabinet, the station will keep the parts vertical and aligned while you apply glue or pound in nails.

    Router jig - option 2 for concealed hinges. $16.99 at, bit not included.

    Ellipse Routing Jig - The Woodworkers Institute