• Furniture Finesse

    SCHLUTER SYSTEMS Innovative installation systems for tile and stone. - Waterproofing, Uncoupling & Drainage membrane - Finishing & Edge Protection Profiles For walls & Countertops - Stairnosing profiles - Movement joints & Cove – Shaped Profiles - Modular Screed System - Shower Systems - Ditra - Kerdi Schluter-Systems is committed to providing reliable ceramic and stone tile installation systems that not only solve problems but benefit the entire tile industry as well.

  • Custom Installations LLC

    Schluter Shower Systems this is how we build a custom shower for our customers

  • Chad Killingsworth

    Custom shower kit

  • Laramie Flooring & Interiors

    Schluter Shower System | Glens Falls Tile Laramie Flooring & Interiors is a certified Schluter Systems dealer.

More from this board

Pocket door for kids or dogs!

Pallet Building for yard, garden, play house.

DIY Dining room table with 2x8 boards (4.75 each for $31.00) from Lowes This is the coolest website!!!

Hidden mixer lift stand...sooo perfect easy access without taking counter space!

just install shelving hardware and slide your baskets on!

boys beds...!

Homemade busy board for fine motor skill development - this is heaven for a curious little one.

mason jar light -- so sweet for screened porch!

simple good ground level deck

silverware drawer

wanna do the NEW living room the 2nd to last...

blues and grays

Hinged canvas - this is such a ingeniously simple idea.

About Project Turn a builder grade vanity into a child friendly vanity by converting the toekick to a step drawer. Also could be used to create a storage drawer, increasing the storage in the bathroom. Author Notes: Moms high heels are not just for dressing up. They are actually quite useful. Especially for brushing teeth and washing hands at a too tall bath vanity when you are four years old. Unless of course your mama trades the high heels in for a hammer, and does a quick mod on your builder grade vanity To get you a much needed boost But only when you need it. Materials and Tools Shopping List: 1 set of Heavy Duty 16" drawer slides 1 - 1x3 @ 8 feet long 1 - 3/4" plywood 16" x width of drawer 2 inch finish nails 1 1/4 inch pocket hole screws wood glue 120 grit sandpaper Tools: measuring tape pencil hammer safety glasses hearing protection Kreg Jig™ drill circular saw nailer countersink drill bit General Instructions You may need to modify or alter this tutorial depending on the type of vanity you use. Optimally, use a vanity with 6" toekick, as shown, with a full overlay door. Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck! Step 1 Vanity Step Drawer Remove any doors from the vanity as shown in the picture. Step 2 Vanity Step Drawer Depending on how your toekick is installed, remove it with a hammer, taking great care to not damage the toekick. My toekick was held in place with plastic corners, stapled, no glue. Step 3 Vanity Step Drawer Measure the opening left from removing the toekick. In my case, that's 22 3/4" wide. I also took a height measurement to confirm I would need to use 1x3 boards to build the step drawer. Also take a second to confirm that the opening is at least 16" deep - otherwise, you will need to adjust your drawer depth and use shorter slides. Step 4 Vanity Step Drawer Once you know the overall width of the step drawer, cut a 1x3 to this length. Then cut two 1x3s @ 15 1/4" for the sides. If your toekick is not cut out like mine, you could also add a front to the step drawer box, so a second 1x3 the width of the opening, minus 1". Step 5 Vanity Step Drawer Now simply attach 3/4" plywood on top, and nail down with glue and 2" nails. Step 6 Vanity Step Drawer Once your step drawers have been built, attach the slides as directed by the slide manufacturer. Preferably, use side mount slides, with a weight rating exceeding 100lbs. Step 7 Vanity Step Drawer With the step drawer built, install in the drawer opening with drawer slides, placed to the tallest possible position. Attach toekick to step drawer (I used a couple of 2" finish nails to hold it on, removed the drawer and marked it, and then attached with the Kreg Jig). If your vanity has inset drawers, you may need to adjust how deep you install the drawers. And that's it - you've got yourself a built in hidden step. Finishing Instructions Preparation Instructions: Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed. Additional Photos Vanity Step Drawer Vanity Step Drawer Vanity Step Drawer Vanity Step Drawer

Children First Letter and DOB Love this!

Rope light attached under cabinets, great night light

Adorable for the small space bathroom!

living room bar

:)

Handle to wall rather than on top in kids

Beautiful space! I want that coffee table!

room arrangement for living room

love the chairs & wall color