Also on these boards
Candlesticks: Clean candlesticks with soap and water to remove dirt. Use metal spray paint and primer, following directions on cans. Let dry. Add another coat if you're not satisfied with the color or if there are spots that need touch-ups. Paint stripes, dots, or any other pattern using enamel craft paint and a brush. These were the old brass ones you can find at flea markets everywhere.
1) give your frames a good cleaning (i used simple green and a dry cloth), and let dry. 2) most frames will benefit greatly if you use a primer like this one (half way down, #65054), which helps the top coat stick better, cover better and go on smoothly. 3) after the primer has dried, spray paint with a high gloss white paint (i used valspar gloss in white). let dry completely (only takes a few hours!) and your ready to start displaying them.