Discover and save creative ideas
    Explore these ideas and more!

    Storing Pipe Clamps

    4-Way Equal Pressure Clamp, (One per Package) - Rockler Woodworking Tools

    Inexpensive pipe-clamp vise Furniture woodworking plans how to build a chest of drawers

    Clamping Trick You Need to Know

    Wooden broom holder.

    Spool clamps keep thin stock tight on curved edges

    Fold-Flat Workbench easy to store and move-pine, mdf and oak trim.

    To keep C-clamps from marring project surfaces, I reuse the plastic caps found on milk jugs as pads.

    Hawk Vertical Clamping System

    corner clamp block


    Right Angle Braces - Wood Mag Tip of the Day For each pair, start with a 12″ square of 3⁄4″ Baltic-birch plywood and cut it in half diagonally. Then cut notches for the clamps, above. You can vary sizes to suit larger or smaller projects. The braces help with more than glue-ups. Clamp a pair to a chest, above, to support the lid as you install hinges.

    Overhead Clamp Rack - Woodworking Shop - American Woodworker

    Tool Cabinet Upgrade | Woodsmith Tips

    #clamp rack with glue caddy etc

    Long-reach clamp extensions

    Clamping with a pipe clamp.

    ❧ When cutting especially wide or long pieces, a support on the side of the tablesaw helps make safe, struggle-free cuts. Here’s an inexpensive and effective support requiring just a length of PVC pipe, a few wood scraps, and a sawhorse. From the scrap, fashion two H-shaped saddles—capable of holding a length of 2" I.D. PVC pipe firmly in place—that fit snugly over your sawhorse’s top rail. Size the saddles so that the PVC pipe stands flush with the top of your tablesaw. —Gil Peck, Pillager, ...

    Bench vise clamp

    7 Classic Ways to Store Clamps - The Woodworker's Shop - American Woodworker

    Clamping Jig for Small Parts