There’s more to see...
Come take a look at what else is here!
Visit Site
  • Cory Propp

    redo cricut mats with Mr. Clean Magic Eraser and Glue sticks

  • Tammy Hefner Cornwell

    Recondition your cricut mats with a magic eraser Then tape off the green sides with painter's tape and spray easy tack on the mat... good as new you'll never have to buy another matt!

  • Ali Bothast

    Never would have thought of using a Mr. Clean Magic eraser! Great tip from fantabulouscricut... / DIY & Crafts / Trendy Pics

  • Darlene Nguyen

    Clean, refresh, and extend the life of your cutting mats.@Kristin :: Teal White Garden Damske

  • Toni Loizzi

    This IS the best idea of how to reuse these!!!!!!!!!!!!!!!!!! Never would have thought of using a Mr. Clean Magic eraser! Great tip from http://fantabulouscricut.blogspot.com/

Related Pins

Recondition your Cricut Mat Wash mat with a wet Mr. Clean Magic Eraser. Repeat with other side of Mr Clean Magic Eraser. Wipe mat with a baby wipe and allow to completely dry. Apply Zigs two way glue all over the mat. Let dry and it's good as new. Zigs Two Way Glue - wide tip Water

recondition your cricut mat - I've never seen it used w/ magic eraser before. dont know if you knew about this @Nubia Cháidez

Another way to "recondition" your Cricut mat! Love these ideas since these are so expensive.

Fantabulous Cricut Challenge Blog: Quick Tip Tuesday - Recondition Your Cricut Mat

Recondition Cricut Mat Spray 1- 2 coats of Krylon Easy-Tack Repositional Adhesive, depending on how sticky you want it. Try to do it outside or in an open area. Note: It's acid free and it's typically about $6.99 at Michael's and you can use a 40% or 50% coupon on it!

Harness the power of that magic little sponge. Cleaning with Magic Erasers via Clean Mama

How to recondition Cricut mats

Tub & Shower Magic (Dawn & White Vinegar.) a pinner says- I made this stuff and it's fantastic! You should see my sinks, showers and faucets They look brand new! Must try.

How to make Cricut Cutting mats sticky again - by Sami. Cover the edges of the mat, then spray it (outdoors) with Krylon Easy-Tack. Spray lightly. Let it dry. The adhesive actually needs to dry before it becomes sticky. Dry to touch in 3 hours so says krylon.com. Krylon Easy-Tack is acid free, low odor.

Fantabulous Cricut Challenge Blog: Quick Tip Tuesday - Recondition Your Cricut Mat

Do you feel like your cricut mats loose their "stick" rather quickly? Here is a quick and inexpensive way to "re-stick" them! You will need a repositionable spray adhesive, I used Krylon. DO NOT use permanent! Tape, my favorite is FROG tape, and a scraper.

how to re-sticky a cricut mat this site is a great resource for the cricut! Found many good tips