Just print off any picture you want, then spray paint a piece of wood black, cut the picture to match the size of the wood. Using Mod podge coat the wood then lay the picture on top. Once it has dried thoroughly, use sandpaper to rough up the edges, then put a layer of mod podge over the picture. paint some eye hooks and use pretty ribbon as a hanger and voila
Print your family photos on wood: Print your picture out on plain paper, Take piece of wood and coat with mod podge, turn picture upside down on wood press and let dry overnight. next day using water and your hands rub paper off of wood (your picture will be on the wood) now cover with more mod podge.
Just print off any picture, spray paint a piece of wood black, cut the picture to match the size of the wood. Coat the wood with Mod Podge and lay the picture on top. Once it has dried thoroughly, use sandpaper to rough up the edges, then seal the photo with another layer of Mod Podge. Screw-in and paint eye hooks and hang with a pretty ribbon. Voila!
Image transfer to wood - *Gel Medium – I found it at Michael’s with the artist acrylic and oil paints – not with the craft acrylic paints. (Mod Podge photo transfer stuff is not transparent, leaves white background, so don’t use it on wood unless you want a white background.) *Mod Podge. *Brush. *Image – mirror image on regular paper. *Piece of wood, cut to the size you want. *Sponge & water
develop photo (whatever size). paint front & sides of board (whatever size your picture is). let the paint dry, and mod podge the area you are going to put the picture on as well as the back of the picture. Press on the picture firmly while rubbing out any bubbled areas. Once the picture is on there, you can mod podge the top and sides. About one hour later they were dry!