Explore Milling Jig, My Project S, and more!

Explore related topics

My new DIY milling jig

My new DIY milling jig

Advice on what finish to use on wood where food will be prepped. GF's "Arm-R'Seal" is suggested (Behlen's Rock Hard, too, but I've never heard of that brand)

Advice on what finish to use on wood where food will be prepped. GF's "Arm-R'Seal" is suggested (Behlen's Rock Hard, too, but I've never heard of that brand)

When using my drill press, I find that some workpieces need to be held down firmly, while others benefit from a stop block for repeat positioning. This two-position drill-press fence …

When using my drill press, I find that some workpieces need to be held down firmly, while others benefit from a stop block for repeat positioning. This two-position drill-press fence …

Already for a few months or even years, I was planning to build my own CNC milling machine. Now I decided it was time to do it! I read a lot about other DIY projects and in the end I liked the design from the Arduino CNC intstructable that I found here. Although the dimensions were unclear and the programming and calibration was all in Spanish, I figured all that out by myself. In the end, I only used the design for reference. In this instructable, I'll try to explain my steps, from the…

Already for a few months or even years, I was planning to build my own CNC milling machine. Now I decided it was time to do it! I read a lot about other DIY projects and in the end I liked the design from the Arduino CNC intstructable that I found here. Although the dimensions were unclear and the programming and calibration was all in Spanish, I figured all that out by myself. In the end, I only used the design for reference. In this instructable, I'll try to explain my steps, from the…

DIY aluminum vertical mill build

DIY aluminum vertical mill build

DIY Drill Press Hold Down - Drill Press Tips, Jigs and Fixtures | WoodArchivist.com

DIY Drill Press Hold Down - Drill Press Tips, Jigs and Fixtures | WoodArchivist.com

I made this with a CNC milling machine. Out of Multiplex wood. All pieces slot together with no glue.    You can also cut out the parts with a jig saw or scroll saw. I recommend a CNC milling machine for better precision.   The material is 12mm multiplex wood.    Have you fabricated my things? Please post your photos on Thingiverse!   Deer Bike Rack by SuFu is licensed under the Creative Commons - Attribution - Non-Commercial license.   Please support me on OpenDesk. Maybe i can earn some…

I made this with a CNC milling machine. Out of Multiplex wood. All pieces slot together with no glue. You can also cut out the parts with a jig saw or scroll saw. I recommend a CNC milling machine for better precision. The material is 12mm multiplex wood. Have you fabricated my things? Please post your photos on Thingiverse! Deer Bike Rack by SuFu is licensed under the Creative Commons - Attribution - Non-Commercial license. Please support me on OpenDesk. Maybe i can earn some…

I´m very frustrated that I don´t have a milling machine in my shop. But my credo is get inspired, use what you have and make the best out of it, so naturally I tried to make my own milling machine (kind of).Tools: drill press (obviously), table saw, miter saw, M5(1/8") and M8(5/16") taps, file, chisel.Materials: 10mm(3/8") plywood, small woodscrews with washers, M8(5/16") threaded rod, two coupling and five regular n...

I´m very frustrated that I don´t have a milling machine in my shop. But my credo is get inspired, use what you have and make the best out of it, so naturally I tried to make my own milling machine (kind of).Tools: drill press (obviously), table saw, miter saw, M5(1/8") and M8(5/16") taps, file, chisel.Materials: 10mm(3/8") plywood, small woodscrews with washers, M8(5/16") threaded rod, two coupling and five regular n...

Table Saw Sawmill Jig - Homemade table saw jig intended to facilitate the process of milling logs. Constructed from plywood, threaded rod, and hardware.

Table Saw Sawmill Jig - Homemade table saw jig intended to facilitate the process of milling logs. Constructed from plywood, threaded rod, and hardware.

Pinterest • The world’s catalog of ideas
Search