Explore Water Impermeability, Cement Mortars, and more!

Explore related topics

LATEX: Polymer latex. When added into the building mortars and coatings, it increases bonding to the substrate, provides water impermeability and elasticity. It is suitable for creating bonding layers, repairing mortars, floor screeds resistant to abrasion, waterproof cement mortars, mortars resistant to chemicals, plasters with high strength and water impermeability etc.

LATEX: Polymer latex. When added into the building mortars and coatings, it increases bonding to the substrate, provides water impermeability and elasticity. It is suitable for creating bonding layers, repairing mortars, floor screeds resistant to abrasion, waterproof cement mortars, mortars resistant to chemicals, plasters with high strength and water impermeability etc.

ISOCURE: Paraffin - based, water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.

ISOCURE: Paraffin - based, water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.

ADIPLAST: Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat® AK 20, Isomat® AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subject to vibration or contraction-expansion.

ADIPLAST: Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat® AK 20, Isomat® AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subject to vibration or contraction-expansion.

ISOCURE-A: Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need of removing ISOCURE- A in case of subsequent layers on the concrete surface.

ISOCURE-A: Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need of removing ISOCURE- A in case of subsequent layers on the concrete surface.

PS-21 (former PROTESIL-W) Ready-to-use, silicone-based, solution without solvents for waterproofing. It ensures extremely high water-repellence and long term protection. It is suitable for waterproofing of tile joints and the protection against rain effect of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly wet substrates.

PS-21 (former PROTESIL-W) Ready-to-use, silicone-based, solution without solvents for waterproofing. It ensures extremely high water-repellence and long term protection. It is suitable for waterproofing of tile joints and the protection against rain effect of various surfaces like natural or synthetic stone, plaster, exposed masonry, decorative bricks, roof tiles, tiles, unpolished marble, exposed concrete etc.). It can be used even on slightly wet substrates.

RETADOL: Concrete setting retarder with plasticizing properties (ASTM C-494: Type D). Increases setting time of concrete (delays setting) and improves its workability and its physical properties. Enables delivery of ready-mixed concrete to longer distances.

RETADOL: Concrete setting retarder with plasticizing properties (ASTM C-494: Type D). Increases setting time of concrete (delays setting) and improves its workability and its physical properties. Enables delivery of ready-mixed concrete to longer distances.

BEVETOL-VZ: Concrete setting retarder (ASTM C-494: Type B). Increases setting time of concrete (delays setting) and improves its workability and its physical properties. Enables delivery of ready-mixed concrete to longer distances.

BEVETOL-VZ: Concrete setting retarder (ASTM C-494: Type B). Increases setting time of concrete (delays setting) and improves its workability and its physical properties. Enables delivery of ready-mixed concrete to longer distances.

SPLIT-2000 (former ASIKON-2000): Deshuttering coating for all types of wooden or steel-faced formwork.

SPLIT-2000 (former ASIKON-2000): Deshuttering coating for all types of wooden or steel-faced formwork.

BEVETOL-RD: Concrete setting retarder - concrete superplasticizer (ASTM C-494: Type A, D and G). When added to the ready-mixed concrete improves its workability and increases its setting time. Suitable for formulating high strength concrete, exposed concrete, pumpable concrete etc. BEVETOL-RD is used where retention of high concrete workability is required and for preparing high strength concrete, exposed concrete, pumpable concrete, screeds for underfloor heating systems etc.

BEVETOL-RD: Concrete setting retarder - concrete superplasticizer (ASTM C-494: Type A, D and G). When added to the ready-mixed concrete improves its workability and increases its setting time. Suitable for formulating high strength concrete, exposed concrete, pumpable concrete etc. BEVETOL-RD is used where retention of high concrete workability is required and for preparing high strength concrete, exposed concrete, pumpable concrete, screeds for underfloor heating systems etc.

ADINOL-RAPID 2H: Hardening accelerator for concrete.  It accelerates the process of growth of initial strength of concrete without affecting negatively the final strength. It contributes to the fast abstraction of formwork facilitating thus the fast casting.

ADINOL-RAPID 2H: Hardening accelerator for concrete. It accelerates the process of growth of initial strength of concrete without affecting negatively the final strength. It contributes to the fast abstraction of formwork facilitating thus the fast casting.

Pinterest • The world’s catalog of ideas
Search