Explore Generally Set, License Number, and more!

Explore related topics

The #seal shall include: the name of the licensee, the #Iowa license number, the word “Iowa” and the words Professional #Engineer.  Seal diameter is typically 1 5/8", generally set up as shown here.

The #seal shall include: the name of the licensee, the #Iowa license number, the word “Iowa” and the words Professional #Engineer. Seal diameter is typically 1 5/8", generally set up as shown here.

This is the setup to use for a #Florida #Temporary #Engineer License **NOTE** This is a different setup from the Standard Engineer Set-up typical size for this #seal is 2.0" Minimum of 1-7/8" in diameter is required -

This is the setup to use for a #Florida #Temporary #Engineer License **NOTE** This is a different setup from the Standard Engineer Set-up typical size for this #seal is 2.0" Minimum of 1-7/8" in diameter is required -

A #Mississippi #Engineer can use either an embosser or a stamp for their official seal.  Either 1 5/8" or 2" diameter seals are acceptable and are fully guaranteed to meet Mississippi's state requirements.  #Free complimentary #eSeal with this item.  This is an example of a #dual licensed #surveyor & engineer #seal.

A #Mississippi #Engineer can use either an embosser or a stamp for their official seal. Either 1 5/8" or 2" diameter seals are acceptable and are fully guaranteed to meet Mississippi's state requirements. #Free complimentary #eSeal with this item. This is an example of a #dual licensed #surveyor & engineer #seal.

This is a sample #California #Seal with the Expiration Date on the Engineer Seal

This is a sample #California #Seal with the Expiration Date on the Engineer Seal

The #South #Carolina #Engineer seal is typically 1-5/8. There are several set ups including this #dual #seal for this state. We also make firm seals and #COA #seals.

The #South #Carolina #Engineer seal is typically 1-5/8. There are several set ups including this #dual #seal for this state. We also make firm seals and #COA #seals.

#Mississippi #Engineers are permitted to use an Embossing Seal or a Rubber Stamp. The seal can be 1-5/8" to 2" but typically  1-5/8 in diameter.

#Mississippi #Engineers are permitted to use an Embossing Seal or a Rubber Stamp. The seal can be 1-5/8" to 2" but typically 1-5/8 in diameter.

Here is another example of the #South #Carolina #Engineer seal. There are several set ups including this #associate #seal for this state. We also make #firm seals and #COA #seals.

Here is another example of the #South #Carolina #Engineer seal. There are several set ups including this #associate #seal for this state. We also make #firm seals and #COA #seals.

New Jersey #Engineers are required to use an #embossing #seal  that meets the following requirements set forth by the State Board: 1 1/2" in diameter 5 digits for License with the following prefixes  GE - Engineer GS - Surveyor GB - Dual License

New Jersey #Engineers are required to use an #embossing #seal that meets the following requirements set forth by the State Board: 1 1/2" in diameter 5 digits for License with the following prefixes GE - Engineer GS - Surveyor GB - Dual License

Georgia Engineer Seal This is the standard example of the #Georgia #Engineer #Seal typical size for this seal is 1-1/2" in diameter

Georgia Engineer Seal This is the standard example of the #Georgia #Engineer #Seal typical size for this seal is 1-1/2" in diameter

This is the standard example of the #Arizona #Engineer #Seal typical size for this seal is 1-1/2" in diameter A #Discipline is required - This #Seal is Showing Expiration Date #Curved line below the stamp.

This is the standard example of the #Arizona #Engineer #Seal typical size for this seal is 1-1/2" in diameter A #Discipline is required - This #Seal is Showing Expiration Date #Curved line below the stamp.

Pinterest
Search