More from this board

Improve your wood shop or workshop - 571 free project plans for workbenches, storage units, tool cabinets and more.

tool storage | Special Tools and Storage Systems

hobby lathe! I so want one!

Dowload free plans to make the BowlMate a bowl carving horse.

34 Must-Have Tools for Homesteading | Off The Grid Ideas by Pioneer Settler pioneersettler.co...

Lighted Storage Cart for Tools and Lumber - Fine Woodworking Tip

fastener identification charts

I wish I would have watched this before building my bench!!

Make this for dremel bits

The Hand Tool Family Tree [Infographic] | Popular Science

In my small shop, any tool that doesn’t fit on a shelf gets casters added to help me make the most of the space I do have. But in the case of my collapsible workstation, there wasn’t a good place to mount casters without interfering with the bench’s folding function. So I built this base from 2x4s and 1⁄4" plywood, mounting 3" locking casters under it. Now, after collapsing the bench, I simply roll it beneath other machines for storage. —Cory Hoehn, Jeffersonville, Ind.

How to make a table saw from a circular saw

American Woodworker #167 August/September 2013 3 Classic Vises Made with Pipe Clamps - Resources - American Woodworker - "Increase Your Bench's Versatility on a budget"

Shaving horses

Taper Jig

An inexpensive way to build a "Moxon vice" - bench-mounted broad area clamping device (you could face the jaw surfaces with plate aluminum and use it for clamping metal for welding, etc)

Router Lathe

On-the-mark circular saw jig. Try your hand with a jig that delivers accuracy for left- or right-bladed saws.

Finger Wrench -- You know immediately that you could have used this tool hundreds of times in the past. Every time you have to hold a small nut or bolt (it holds either) in an awkward spot, this wrench works marvellously. Finger pressure holds the nut or bolt in the wrench, while the raised, tapered slot prevents it from turning. Made from high-impact ABS, the sleeve adjusts to fit any size of finger. Holds all nuts up to 1/2" Price: $3.95

For those occasions when you need a stable way to hold a board on its edge, turn to a tool that’s as old as woodworking itself—the wedge. I fashioned the wedge stands shown at right from scraps of 2x6 and a 3/8x6" bolt and nut. To make the stand, cut a 7"-long chunk from the 2x6 and drill a 1/2" hole centere d 2 1/4" from the edge and 1 3/4" up from the bottom. This hole reduces the likelihood of the stand splitting once the wedge is cut out. Mark the cutlines for the wedge as shown in the ...

Mini-Tablesaw / Router / Shaper for Dremel Rotary Tool

Three Sharpening Post Links « The Sharpening Blog; How to convert a belt sander into a sharpening tool

Norm's version of an affordable workbench. Easy to build design and lots of built in versatility.

Router Bit Sets :: Large Sets :: 70 Bits Professional Quality Router Bit Set Carbide - 1/2" Shank - Yonico 17702