Rel-Tek Corporation Sensors and equipment

WellBoss-2 New and Enhanced Gas Detection System for your Gas/Oil Well Properties New: The new 100 watt, high-efficiency solar panel and high-capacity rechargeable battery pack supports the four combustible gas sensors and alarming accessories, enabling optimal detection of gas and vapor emissions on your gas or oil well.

Four full-spectrum combustible gas sensors are installed at potential fuel gas leakage sites on a bus or truck (engine, fuel tanks, valves, and cabin) to detect high levels of potentially explosive fuel gas. A compact cab-mounted control panel (8”x4”x3”) monitors the four sensors and alarms if any sensor reaches an alarm threshold. The wide spectrum sensors respond properly to essentially any combustible gas, including CNG, LNG, methane, ethane

Rel-Tek engineers, manufactures and supplies complete monitoring/ control systems, includes software, sensors and alarms. Our Millennia-DX, PC-based software is simple to use. Rel-Tek customizes the system setup for your...

Whether you require one or a thousand sensors, Rel-Tek manufactures and supplies complete monitoring/control systems not just bits and pieces modularly expandable, and they are fast.

Gases can Kill -- Monitoring for hazardous gases continuously during tunnel construction is essential due to the high speed of gas releases.

MagiKal ® is our flagship Automatic Gas Sensor Calibration (AGSC) system that uses a PC, running MagiKal software along with our standard Millennia-DX monitoring and control package. Schedule years ahead to calibrate your gas sensors monthly, weekly or even daily, all without any effort by management and technical personnel.

Millennia-DX ™ (Version FT) is an enhanced version of the already powerful and easy-to-use EZ-Trol/DX™ real-time monitoring and control software. Version FT is a true (native) 64-bit application running on a Pentium PC under Windows 7 Pro and including Linux taking advantage of powerful 64-bit features and utilities within the latest Windows and Linux platforms. The Linux system that Millennia-DX ™ has been run and tested on are the latest PCLinuxOS and others.

DXBus Field I/O Cards - An arsenal of off-the-shelf I/O cards communicate over 10 miles over a twisted-pair cable - or to virtually anywhere on optical fibers, phone lines or radio - at a selectable speed: 19.2k, 38.4k, 57.6k or 115.2k Baud. The 3x4" DX2202 has two analog inputs (4-20ma, 12-bit resolution), two digital inputs (NO/NC dry contacts) and two digital outputs (SPDT relays with 110V-5A contacts).

MagneBoss - Belt Monitoring and Control System MagneBoss monitors the speed and slip of every belt in your system. It magnetically monitors four belt-speed parameters at every drive -- belt idler and drive-roller speeds (to determine slip), the out-bye belt speed, the load-idler (for activating water spray.) Distributed intelligence includes a PLC at each belt drive, providing fast fault detection and responses. For more info, visit www.rel-tek.com

WaterBoss - Submersible Water Level Monitoring System Unique design with replaceable pressure modules, covers low (0-10” WG differential) to higher pressures (0-300 psi gage). Use the low range for monitoring pitot tube flow (gas or liquids) or for monitoring liquid levels (water pool or oil reservoir levels). Or, choose from the 10 higher pressure ranges for monitoring line and tank pressures. Thousands of applications available from one small product. For more info, visit www.rel-tek.com

AwAir Automatically Calibrating Gas Monitoring System it’s an integrated gas monitoring system for an underground Refuge Alternative (RA)…aka, emergency shelter. For over two years Rel-Tek has worked to develop and perfect a gas monitoring system to satisfy the demanding RA air-monitoring requirements, per 30 CFR, Parts 7 and 75. For more info, visit www.rel-tek.com.

WellBoss-2 New and Enhanced Gas Detection System for your Gas/Oil Well Properties The100 watt, high-efficiency solar panel and high-capacity rechargeable battery pack supports the four combustible gas sensors and alarming accessories, enabling optimal detection of gas and vapor emissions on your gas or oil well. Intrinsic safety approvals avoid the nuisance of XP equipment. For more info, visit www.rel-tek.com.

Millennia/DX Monitoring System Uniquely integrated software and hardware package provide a fast, capable monitoring and control system - specially engineered for high reliability and ease of use. Software runs on a PC with Windows Operating System. For more information, please visit www.rel-tek.com

The Remote Alarm-1000/Dual allows you the opportunity to alarm three different thresholds from one unit. With several different color strobes available you can customize your alarm. Audio alarm is 105dBA@ 2 ft. For more information, please visit www.rel-tek.com

The CRSR®-101 is essential whenever I.S. barriers are used for powering and monitoring sensors in hazardous areas. The device performs important functions critical to the successful installation of sensors in hazardous areas. Often, when setting up a sensor powered through an I.S. barrier, the sensor is starved for voltage? For more information, please visit www.rel-tek.com. Thank you.

The Kal-Kit® is a convenient portable calibration kit containing everything needed to calibrate Rel-Tek (and most other) gas sensors. It contains two 20-liter tanks of cal gas, usually zero and a selected span gas. Tanks are nested in a shock resistant bed, rigidly captured by a brace and wing nut. For more info, please visit www.rel-tek.com. Thank you.