Trupply (trupply) on Pinterest

Competitions / Trupply Competition

Winters Instruments

Winters Instruments

Lap Joint Flanges

Lap Joint Flanges / Lap Joint Flanges are used in conjunction with "Lap Joint Stub Ends". These flanges are nearly identical to Slip On flanges with the exception of the radius at the intersection of the flange face and the bore. Lap Joint Flanges may be used at all pressures and are available in a full size range. These flanges slip over the pipe. Bolting pressure is transmitted to the gasket by the pressure of the flange against the back of the pipe lap.
http://www.trupply.com/collections/lap-joint-flange

Blind Flanges / Blind Flanges are manufactured without a bore and used to blank off the ends of pipes, valves and pressure vessel openings. From a standpoint of internal pressure and bolt loading, blind flanges are of the most highly stressed flange types. Because most of these stresses are of bending types near the center and there are no standard inside diameters, these flanges are suitable for higher pressure/temperature applications.
http://www.trupply.com/collections/blind-flange

Threaded Fittings

Threaded Fittings / Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld Fittings, threaded fittings are mainly used for small pipe diameters.Threaded piping is commonly used in low-cost, noncritical applications such as domestic water, fire protection, and industrial cooling water systems.Threaded fittings are normally made of cast gray or malleable iron, cast brass or bronze or forged alloy and carbon steel.
http://www.trupply.com/collections/threaded-fittings

Slip On Flanges

Slip On Flanges / The calculated strength from Slip On flanges under internal pressure is 2/3, and their life under fatigue is about 1/3, that of Welding Neck Flanges.The connection with the pipe is done with two fillet welds. After sliding the flange on the pipe, the distance inside the flange between the end of pipe and the flange face should be: Wall thickness of pipe + 3 mm. This space is necessary to prevent damage to flange face during the welding process. http://www.trupply.com/collections/slip-on

Gauges / http://www.trupply.com/collections/gauges

Hammer Unions / Hammer Unions are designed to enjoin mud tanks instantly without having to deal with the flange connections at all. If the mud tanks are not aligned in the right kind of way necessary hammer unions can still be used in order to make absolutely non-leak seals that are tightened. They generally have three parts, a male, a female, and a nut. http://www.trupply.com/collections/hammer-union

Valves / Trupply is the leading supplier of Valves! Visit our website and see what all we have to offer. Let us help you by providing you with all things industrial supply that you need.
http://www.trupply.com/collections/butterfly-valves

Socket Weld Fittings

Socket Weld Fittings / This fitting design has a socket or recess for the pipe to slip into. A back weld is applied to hold the pipe in the fitting. Socket Weld fittings are formed by using either the drop forge or upset forging method. They are forged solid and require complete machining.
http://www.trupply.com/collections/socket-weld-fittings

Weld Neck Flanges

Weld Neck Flanges / They include a long tapered hub that gradually meets the wall thickness from the pipe or fitting. The long tapered hub provides an important reinforcement for use in several applications. They also provide excellent stress distribution through the tapered hub and are easily radiographed for flaw detection. This flange type will be welded to a pipe or fitting with a single full penetration Buttweld. http://www.trupply.com/collections/weld-neck-flange

Hot Tap Tees & Saddles

Hot Tap Tees & Saddles / Hot Tap Tees: Available from size 2 inch to 24 inch in A234 WPB. Mating flanges available in 150#, 300# & 600#. Weld Saddles & Shape Nipples: Available from size 2 inch to 8 inch branch size for up to 36 inch run pipe. A234 WPB. Full Encirclement Saddles: Available from size 2 to 42 inch nominal pipe size type 1 to type 5. http://www.trupply.com/collections/hot-tap-tees-saddles

Buttweld Fittings

Buttweld Fittings / Buttweld Fittings:
This fitting creates leak-proof joints. The continuous metal structure formed between pipe and fitting adds strength. Smooth inner surface and gradual directional changes reduce pressure losses and turbulence and minimize the action of corrosion and erosion. A welded system utilizes minimum space.

http://www.trupply.com/

Trupply's Product Offering

Trupply's Product Offering

Dresser Pipeline Products

Dresser Pipeline Products / Pipeline repair

Oh no! Pinterest doesn't work unless you turn on JavaScript.

.NagBase { display: none; }